| Switch, type | Fixed Port |
|---|---|
| Total number of ports | 28 |
| Мain ports, type | 24x 10/100/1000Base-T |
| Power Over Ethernet (PoE) | PoE, 370 W (Up to 30W per port) |
| Uplink ports | 4x 10GbE SFP+ |
| Open (10GB) slots | No |
| Management | 1x Dedicated Mgmt Interface, Managed via the Web with the Meraki cloud management platform |
| Fans | Fanless |
| Power supply | Inernal |
| Routing | Layer 2 Only |
| Routing/Switching capacity, Gbps | 128 Gbps |
| Throughput, Mpps | 95.23 Mpps |
| MAC addresses | 16K |
| VLAN (number, standards) | 802.1Q VLAN and trunking support for up to 4 094 VLANs |
| QoS | 802.1p Quality of Service, 8 queues (w/ 6 configurable for DSCP-to-CoS mapping) |
| L2 network standards | 802.1ab, 802.1w |
| Security | IEEE 802.1X RADIUS and MAB, hybrid authentication, and RADIUS server testing; Port security: Sticky MAC, MAC whitelisting; DHCP snooping, detection and blocking; IPv4 and IPv6 ACLs; Single-Host/Multi-Domain/Multi-Host/Multi Authentication; RBAC; etc. |
| Dimensions (W, D, H), mm | 440 x 250 x 44 |
| Мounting option | 1U Rack Mount (Front) |
Cisco Meraki MS125-24P 10G L2 Cld-Mng...
№ MS125-24P-HW
| Switch, type | Fixed Port |
|---|---|
| Total number of ports | 28 |
| Мain ports, type | 24x10/100/1000Base-T |
| Power Over Ethernet (PoE) | No |
| Uplink ports | 4x10GE SFP |
| Open (10GB) slots | No |
| Management | Managed via the Web with the Meraki cloud management platform; Integrated with Meraki Wireless and complete portfolio of IT products and solutions; SNMP and SYSLOG support for integration with other network management solutions |
| Stackable | 2 x stacking ports; Physically stack up to 8 switches with 160 Gbps of stacking bandwidth; Virtual Stacking supports thousands of switch ports in a single logical stack for unified management, monitoring, and configuration |
| Fans | Variable speed fans |
| Power supply | Hot-swappable Power Supply Configuration; Supported Power Supply: 2 x 250W PSU (Single power supply (PSU) included. For redundancy, second PSU is sold separately) |
| Routing | Layer 3 Advanced |
| Routing/Switching capacity, Gbps | 128 Gbps |
| Throughput, Mpps | 95.24 Mpps |
| MAC addresses | 96000 MAC address table size |
| VLAN (number, standards) | 802.1Q VLAN and trunking support for up to 4094 VLANs |
| QoS | 802.1p Quality of Service, 8 queues (w/ 6 configurable for DSCP-to-CoS mapping) |
| L2 network standards | IEEE 802.3, IEEE 802.3u, IEEE 802.1D, IEEE 802.1Q, IEEE 802.1p, IEEE 802.3ad, IEEE 802.1w, IEEE 802.1x, IEEE 802.1ab |
| L3 network standards | Static routing, OSFPv2 (with support for up to 16 ECMP Routes), Multicast routing, Warm Spare (VRRP) - OSPF and Warm Spare do not operate concurrently, DHCP Server, DHCP Relay |
| Security | Integrated multi-factor authentication for Dashboard management; Role-based access control (RBAC) with granular device and configuration control; IEEE 802.1X RADIUS and MAB, hybrid authentication and RADIUS server testing; IPv4 and IPv6 ACLs |
| Dimensions (W, D, H), mm | 485 x 518 x 44 |
| Мounting option | Rackmount |
Cisco Meraki MS350-24 L3 Stck Cld-Mng...
№ MS350-24-HW
| Switch, type | Fixed Port |
|---|---|
| Total number of ports | 24 |
| Мain ports, type | 24x 10/100/1000Base-T |
| Power Over Ethernet (PoE) | No |
| Uplink ports | Modular; Two 40G or four/eight 10G modular fiber uplinks |
| Management | 1x Dedicated Management Interface; Managed via Cisco Meraki Dashboard |
| Stackable | 2x 120G Hardware Stack Ports; Physically stack up to 8 switches with 480 Gbps of stacking bandwidth on all models; Virtual stacking supports thousands of switch ports in a single logical stack for unified management, monitoring, and configuration |
| Fans | 3x Hot Swap Fans |
| Power supply | 1 x Power Supply (MA-PWR-350WAC); Dual Hot Swap Power Supply |
| Routing | Static routing, OSPFv2l Multicast routing (PIM-ASM); Warm Spare (VRRP) ; DHCP Server, DHCP Relay |
| Routing/Switching capacity, Gbps | 208 Gbps |
| Throughput, Mpps | 154.76 Mpps |
| MAC addresses | 32K |
| VLAN (number, standards) | 802.1Q VLAN and trunking support for up to 4094 VLANs (1000 active VLANs with STP enabled) |
| QoS | 802.1p Quality of Service, 8 queues (w/ 6 configurable for DSCP-to-CoS mapping) |
| L2 network standards | Single Instance of 802.1s Multiple Spanning Tree Protocol (interoperable with RSTP, STP, PVST, RPVST); 802.1ab Link Layer Discovery Protocol (LLDP) and Cisco Discovery Protocol (CDP); 802.3ad Link aggregation |
| L3 network standards | Static routing, OSPFv2; Multicast routing (PIM-ASM); Warm Spare (VRRP) ; DHCP Server, DHCP Relay |
| IPv6 functionality | IPv4 and IPv6 ACLs |
| Security | Port security: Sticky MAC, MAC allow lists; DHCP; IEEE 802.1X RADIUS and MAB, hybrid authentication and RADIUS server testing; Single-Host/Multi-Domain/Multi-Host/Multi Authentication; Integrated multi-factor authentication for Dashboard management; etc. |
| Dimensions (W, D, H), mm | 445 x 449 x 44 mm |
| Мounting option | 1U RackMount |
Cisco Meraki MS390 24GE L3 Switch
№ MS390-24-HW
| Switch, type | Fixed Port |
|---|---|
| Total number of ports | 48 |
| Мain ports, type | 10/100/1000Base-T (40x 1G + 8x 2.5G) |
| Power Over Ethernet (PoE) | PoE (802.3bt), PoE Port Budget: 30W; PoE Switch Budget: 740W |
| Uplink ports | 4x 10GbE SFP+ |
| Management | Managed via Cisco Meraki Dashboard, 1x Dedicated Mgmt Interface |
| Fans | Fixed Internal |
| Power supply | Internal |
| Routing/Switching capacity, Gbps | 200 Gbps |
| VLAN (number, standards) | 802.1Q VLAN tagging |
| L2 network standards | SNMP, DHCP |
| IPv6 functionality | IPv4/6 ACL support, DHCP |
| Security | 802.1X Authentication |
| Dimensions (W, D, H), mm | 440 x 340 x 44 mm |
| Мounting option | Integrated 1U Rack Mount |
Cisco Meraki MS130-48X Cloud Mgd. 40G...
№ MS130-48X-HW
| Switch, type | Fixed Port |
|---|---|
| Total number of ports | 28 |
| Мain ports, type | 24x10/100/1000Base-T with with auto negotiation and auto-MDIX |
| Power Over Ethernet (PoE) | 802.3af (PoE) 15.4 W per port, 802.3at (PoE+) 25.5 W per port, maximum PoE output: 370 W PoE; available simultaneously on all ports |
| Uplink ports | 4 x SFP+ 10G |
| Open (10GB) slots | No |
| Management | Managed via the Web with the Meraki cloud management platform; Integrated with Meraki Wireless and complete portfolio of IT products and solutions; SNMP and SYSLOG support for integration with other network management solutions |
| Stackable | 2 x stacking ports; Physically stack up to 8 switches with 160 Gbps of stacking bandwidth; Virtual Stacking supports thousands of switch ports in a single logical stack for unified management, monitoring, and configuration |
| Fans | Variable speed fans |
| Power supply | Hot-swappable Power Supply Configuration; Supported Power Supply: 2 x 250W PSU (Single power supply (PSU) included. For redundancy, second PSU is sold separately) |
| Routing | Layer 3 Advanced |
| Routing/Switching capacity, Gbps | 128 Gbps |
| Throughput, Mpps | 95.24 Mpps |
| MAC addresses | 96000 MAC address table size |
| VLAN (number, standards) | 802.1Q VLAN and trunking support for up to 4094 VLANs |
| QoS | 802.1p Quality of Service, 8 queues (w/ 6 configurable for DSCP-to-CoS mapping) |
| L2 network standards | IEEE 802.3, IEEE 802.3u, IEEE 802.1D, IEEE 802.1Q, IEEE 802.1p, IEEE 802.3ad, IEEE 802.1w, IEEE 802.1x, IEEE 802.1ab |
| L3 network standards | Static routing, OSFPv2 (with support for up to 16 ECMP Routes), Multicast routing, Warm Spare (VRRP) - OSPF and Warm Spare do not operate concurrently, DHCP Server, DHCP Relay |
| Security | Integrated multi-factor authentication for Dashboard management; Role-based access control (RBAC) with granular device and configuration control; IEEE 802.1X RADIUS and MAB, hybrid authentication and RADIUS server testing; IPv4 and IPv6 ACLs |
| Dimensions (W, D, H), mm | 485 x 518 x 44 |
| Мounting option | Rackmount |
Cisco Meraki MS350-24P L3 Stck Cld-Mn...
№ MS350-24P-HW
| Switch, type | Fixed Port |
|---|---|
| Total number of ports | 24 |
| Мain ports, type | 24x 10/100/1000Base-T |
| Power Over Ethernet (PoE) | PoE+; PoE W/ Primary PS:445W, Power Load (idle/max): 84.1 / 554.4 W |
| Uplink ports | Modular; Two 40G or four/eight 10G modular fiber uplinks |
| Management | 1x Dedicated Management Interface; Managed via Cisco Meraki Dashboard |
| Stackable | 2x 120G Hardware Stack Ports; Physically stack up to 8 switches with 480 Gbps of stacking bandwidth on all models; Virtual stacking supports thousands of switch ports in a single logical stack for unified management, monitoring, and configuration |
| Fans | 3x Hot Swap Fans |
| Power supply | 1 x Power Supply (MA-PWR-715WAC); Dual Hot Swap Power Supply |
| Routing | Static routing, OSPFv2l Multicast routing (PIM-ASM); Warm Spare (VRRP) ; DHCP Server, DHCP Relay |
| Routing/Switching capacity, Gbps | 208 Gbps |
| Throughput, Mpps | 154.76 Mpps |
| MAC addresses | 32K |
| VLAN (number, standards) | 802.1Q VLAN and trunking support for up to 4094 VLANs (1000 active VLANs with STP enabled) |
| QoS | 802.1p Quality of Service, 8 queues (w/ 6 configurable for DSCP-to-CoS mapping) |
| L2 network standards | Single Instance of 802.1s Multiple Spanning Tree Protocol (interoperable with RSTP, STP, PVST, RPVST); 802.1ab Link Layer Discovery Protocol (LLDP) and Cisco Discovery Protocol (CDP); 802.3ad Link aggregation |
| L3 network standards | Static routing, OSPFv2; Multicast routing (PIM-ASM); Warm Spare (VRRP) ; DHCP Server, DHCP Relay |
| IPv6 functionality | IPv4 and IPv6 ACLs |
| Security | Port security: Sticky MAC, MAC allow lists; DHCP; IEEE 802.1X RADIUS and MAB, hybrid authentication and RADIUS server testing; Single-Host/Multi-Domain/Multi-Host/Multi Authentication; Integrated multi-factor authentication for Dashboard management; etc. |
| Dimensions (W, D, H), mm | 445 x 449 x 44 mm |
| Мounting option | 1U RackMount |
Cisco Meraki MS390 24GE L3 PoE+ Switc...
№ MS390-24P-HW
| Switch, type | Fixed Port |
|---|---|
| Total number of ports | 28 |
| Мain ports, type | 16x10/100/1000Base-T + 8x10GBase-T |
| Power Over Ethernet (PoE) | Available PoE+ Power: 740 W |
| Uplink ports | 4x10GE SFP |
| Open (10GB) slots | No |
| Management | Managed via the Web with the Meraki cloud management platform; Integrated with Meraki Wireless and complete portfolio of IT products and solutions; SNMP and SYSLOG support for integration with other network management solutions |
| Stackable | 2 x stacking ports; Physically stack up to 8 switches with 160 Gbps of stacking bandwidth; Virtual Stacking supports thousands of switch ports in a single logical stack for unified management, monitoring, and configuration |
| Fans | Variable speed fans |
| Power supply | Hot-swappable Power Supply Configuration; Supported Power Supply: 2 x 1025W PSU (Single power supply (PSU) included. For redundancy, second PSU is sold separately) |
| Routing | Layer 3 Advanced |
| Routing/Switching capacity, Gbps | 272 Gbps |
| Throughput, Mpps | 202.38 Mpps |
| MAC addresses | 512000 MAC address table size |
| VLAN (number, standards) | 802.1Q VLAN and trunking support for up to 4094 VLANs |
| QoS | 802.1p Quality of Service, 8 queues (w/ 6 configurable for DSCP-to-CoS mapping) |
| L2 network standards | IEEE 802.3, IEEE 802.3u, IEEE 802.3af, IEEE 802.3at, IEEE 802.1D, IEEE 802.1Q, IEEE 802.1p, IEEE 802.3ad, IEEE 802.1w, IEEE 802.1x, IEEE 802.1ab |
| L3 network standards | Static routing, OSFPv2 (with support for up to 16 ECMP Routes), Multicast routing, Warm Spare (VRRP) - OSPF and Warm Spare do not operate concurrently, DHCP Server, DHCP Relay |
| Security | Integrated multi-factor authentication for Dashboard management; Role-based access control (RBAC) with granular device and configuration control; IEEE 802.1X RADIUS and MAB, hybrid authentication and RADIUS server testing; IPv4 and IPv6 ACLs |
| Dimensions (W, D, H), mm | 485 x 595 x 44 |
| Мounting option | Rackmount |
Cisco Meraki MS350-24X L3 Stck Cld-Mn...
№ MS350-24X-HW
| Switch, type | Fixed Port |
|---|---|
| Total number of ports | 24 |
| Мain ports, type | 24x 10/100/1000Base-T |
| Power Over Ethernet (PoE) | UPoE/802.3bt switch; PoE W/ Primary PS:830W, Power Load (idle/max): 85.4 / 990.3 W |
| Uplink ports | Modular; Two 40G or four/eight 10G modular fiber uplinks |
| Management | 1x Dedicated Management Interface; Managed via Cisco Meraki Dashboard |
| Stackable | 2x 120G Hardware Stack Ports; Physically stack up to 8 switches with 480 Gbps of stacking bandwidth on all models; Virtual stacking supports thousands of switch ports in a single logical stack for unified management, monitoring, and configuration |
| Fans | 3x Hot Swap Fans |
| Power supply | 1 x Power Supply (MA-PWR-1100WAC); Dual Hot Swap Power Supply |
| Routing | Static routing, OSPFv2l Multicast routing (PIM-ASM); Warm Spare (VRRP) ; DHCP Server, DHCP Relay |
| Routing/Switching capacity, Gbps | 208 Gbps |
| Throughput, Mpps | 154.76 Mpps |
| MAC addresses | 32K |
| VLAN (number, standards) | 802.1Q VLAN and trunking support for up to 4094 VLANs (1000 active VLANs with STP enabled) |
| QoS | 802.1p Quality of Service, 8 queues (w/ 6 configurable for DSCP-to-CoS mapping) |
| L2 network standards | Single Instance of 802.1s Multiple Spanning Tree Protocol (interoperable with RSTP, STP, PVST, RPVST); 802.1ab Link Layer Discovery Protocol (LLDP) and Cisco Discovery Protocol (CDP); 802.3ad Link aggregation |
| L3 network standards | Static routing, OSPFv2; Multicast routing (PIM-ASM); Warm Spare (VRRP) ; DHCP Server, DHCP Relay |
| IPv6 functionality | IPv4 and IPv6 ACLs |
| Security | Port security: Sticky MAC, MAC allow lists; DHCP; IEEE 802.1X RADIUS and MAB, hybrid authentication and RADIUS server testing; Single-Host/Multi-Domain/Multi-Host/Multi Authentication; Integrated multi-factor authentication for Dashboard management; etc. |
| Dimensions (W, D, H), mm | 445 x 449 x 44 mm |
| Мounting option | 1U RackMount |
Cisco Meraki MS390 24GE L3 UPoE Switc...
№ MS390-24U-HW
| Switch, type | Fixed Port |
|---|---|
| Total number of ports | 52 |
| Мain ports, type | 48x10/100/1000Base-T |
| Power Over Ethernet (PoE) | No |
| Uplink ports | 4x10GE SFP |
| Open (10GB) slots | No |
| Management | Managed via the Web with the Meraki cloud management platform; Integrated with Meraki Wireless and complete portfolio of IT products and solutions; SNMP and SYSLOG support for integration with other network management solutions |
| Stackable | 2 x stacking ports; Physically stack up to 8 switches with 160 Gbps of stacking bandwidth; Virtual Stacking supports thousands of switch ports in a single logical stack for unified management, monitoring, and configuration |
| Fans | Variable speed fans |
| Power supply | Hot-swappable Power Supply Configuration; Supported Power Supply: 2 x 250W PSU (Single power supply (PSU) included. For redundancy, second PSU is sold separately) |
| Routing | Layer 3 Advanced |
| Routing/Switching capacity, Gbps | 176 Gbps |
| Throughput, Mpps | 127.98 Mpps |
| MAC addresses | 96000 MAC address table size |
| VLAN (number, standards) | 802.1Q VLAN and trunking support for up to 4094 VLANs |
| QoS | 802.1p Quality of Service, 8 queues (w/ 6 configurable for DSCP-to-CoS mapping) |
| L2 network standards | IEEE 802.3, IEEE 802.3u, IEEE 802.1D, IEEE 802.1Q, IEEE 802.1p, IEEE 802.3ad, IEEE 802.1w, IEEE 802.1x, IEEE 802.1ab |
| L3 network standards | Static routing, OSFPv2 (with support for up to 16 ECMP Routes), Multicast routing, Warm Spare (VRRP) - OSPF and Warm Spare do not operate concurrently, DHCP Server, DHCP Relay |
| Security | Integrated multi-factor authentication for Dashboard management; Role-based access control (RBAC) with granular device and configuration control; IEEE 802.1X RADIUS and MAB, hybrid authentication and RADIUS server testing; IPv4 and IPv6 ACLs |
| Dimensions (W, D, H), mm | 485 x 518 x 44 |
| Мounting option | Rackmount |
Cisco Meraki MS350-48 L3 Stck Cld-Mng...
№ MS350-48-HW
| Switch, type | Fixed Port |
|---|---|
| Total number of ports | 48 |
| Мain ports, type | 48x 10/100/1000Base-T |
| Power Over Ethernet (PoE) | No |
| Uplink ports | Modular; Two 40G or four/eight 10G modular fiber uplinks |
| Management | 1x Dedicated Management Interface; Managed via Cisco Meraki Dashboard |
| Stackable | 2x 120G Hardware Stack Ports; Physically stack up to 8 switches with 480 Gbps of stacking bandwidth on all models; Virtual stacking supports thousands of switch ports in a single logical stack for unified management, monitoring, and configuration |
| Fans | 3x Hot Swap Fans |
| Power supply | 1 x Power Supply (MA-PWR-350WAC); Dual Hot Swap Power Supply |
| Routing | Static routing, OSPFv2l Multicast routing (PIM-ASM); Warm Spare (VRRP) ; DHCP Server, DHCP Relay |
| Routing/Switching capacity, Gbps | 256 Gbps |
| Throughput, Mpps | 190.48 Mpps |
| MAC addresses | 32K |
| VLAN (number, standards) | 802.1Q VLAN and trunking support for up to 4094 VLANs (1000 active VLANs with STP enabled) |
| QoS | 802.1p Quality of Service, 8 queues (w/ 6 configurable for DSCP-to-CoS mapping) |
| L2 network standards | Single Instance of 802.1s Multiple Spanning Tree Protocol (interoperable with RSTP, STP, PVST, RPVST); 802.1ab Link Layer Discovery Protocol (LLDP) and Cisco Discovery Protocol (CDP); 802.3ad Link aggregation |
| L3 network standards | Static routing, OSPFv2; Multicast routing (PIM-ASM); Warm Spare (VRRP) ; DHCP Server, DHCP Relay |
| IPv6 functionality | IPv4 and IPv6 ACLs |
| Security | Port security: Sticky MAC, MAC allow lists; DHCP; IEEE 802.1X RADIUS and MAB, hybrid authentication and RADIUS server testing; Single-Host/Multi-Domain/Multi-Host/Multi Authentication; Integrated multi-factor authentication for Dashboard management; etc. |
| Dimensions (W, D, H), mm | 445 x 449 x 44 mm |
| Мounting option | 1U RackMount |
Cisco Meraki MS390 48GE L3 Switch
№ MS390-48-HW
| Switch, type | Fixed Port |
|---|---|
| Total number of ports | 48 |
| Мain ports, type | 48x 10/100/1000Base-T |
| Power Over Ethernet (PoE) | PoE; PoE W/ Primary PS:437W, Power Load (idle/max): 92.6 / 555 W |
| Uplink ports | Modular; Two 40G or four/eight 10G modular fiber uplinks |
| Management | 1x Dedicated Management Interface; Managed via Cisco Meraki Dashboard |
| Stackable | 2x 120G Hardware Stack Ports; Physically stack up to 8 switches with 480 Gbps of stacking bandwidth on all models; Virtual stacking supports thousands of switch ports in a single logical stack for unified management, monitoring, and configuration |
| Fans | 3x Hot Swap Fans |
| Power supply | 1 x Power Supply (MAPWR- 715WAC); Dual Hot Swap Power Supply |
| Routing | Static routing, OSPFv2l Multicast routing (PIM-ASM); Warm Spare (VRRP) ; DHCP Server, DHCP Relay |
| Routing/Switching capacity, Gbps | 256 Gbps |
| Throughput, Mpps | 190.48 Mpps |
| MAC addresses | 32K |
| VLAN (number, standards) | 802.1Q VLAN and trunking support for up to 4094 VLANs (1000 active VLANs with STP enabled) |
| QoS | 802.1p Quality of Service, 8 queues (w/ 6 configurable for DSCP-to-CoS mapping) |
| L2 network standards | Single Instance of 802.1s Multiple Spanning Tree Protocol (interoperable with RSTP, STP, PVST, RPVST); 802.1ab Link Layer Discovery Protocol (LLDP) and Cisco Discovery Protocol (CDP); 802.3ad Link aggregation |
| L3 network standards | Static routing, OSPFv2; Multicast routing (PIM-ASM); Warm Spare (VRRP) ; DHCP Server, DHCP Relay |
| IPv6 functionality | IPv4 and IPv6 ACLs |
| Security | Port security: Sticky MAC, MAC allow lists; DHCP; IEEE 802.1X RADIUS and MAB, hybrid authentication and RADIUS server testing; Single-Host/Multi-Domain/Multi-Host/Multi Authentication; Integrated multi-factor authentication for Dashboard management; etc. |
| Dimensions (W, D, H), mm | 445 x 449 x 44 mm |
| Мounting option | 1U RackMount |
Cisco Meraki MS390 48GE L3 POE+ Switc...
№ MS390-48P-HW
| Switch, type | Fixed Port |
|---|---|
| Total number of ports | 18 |
| Мain ports, type | 16xSFP |
| Power Over Ethernet (PoE) | No |
| Uplink ports | 2x10GE SFP |
| Open (10GB) slots | No |
| Management | Managed via the Web with the Meraki cloud management platform; Integrated with Meraki Wireless and complete portfolio of IT products and solutions; SNMP and SYSLOG support for integration with other network management solutions |
| Stackable | 2 x stacking ports; Physically stack up to 8 switches with 160 Gbps of stacking bandwidth; Virtual Stacking supports thousands of switch ports in a single logical stack for unified management, monitoring, and configuration |
| Fans | Field-replaceable, hot-swappable fans |
| Power supply | Hot-swappable Power Supply Configuration; Supported Power Supply: 2 x 250W PSU (Single power supply (PSU) included. For redundancy, second PSU is sold separately) |
| Routing | Layer 3 Advanced |
| Routing/Switching capacity, Gbps | 72 Gbps |
| MAC addresses | 96000 MAC address table size |
| VLAN (number, standards) | 802.1Q VLAN and trunking support for up to 4094 VLANs |
| QoS | 802.1p Quality of Service, 8 queues (w/ 6 configurable for DSCP-to-CoS mapping) |
| L2 network standards | IEEE 802.3, IEEE 802.3u, IEEE 802.1D, IEEE 802.1Q, IEEE 802.1p, IEEE 802.3ad, IEEE 802.1w, IEEE 802.1x, IEEE 802.1ab |
| L3 network standards | Static routing, OSFPv2, Multicast routing, Warm Spare (VRRP) - OSPF and Warm Spare do not operate concurrently, DHCP Server, DHCP Relay |
| Security | IEEE 802.1X, MAB, and Hybrid authentication support for wired access control with RADIUS server monitoring; ACL support (IPv4 & IPv6) and MAC whitelisting; Single-Host/Multi-Domain/Multi-Host/Multi Authentication |
| Dimensions (W, D, H), mm | 485 x 517 x 44 |
| Мounting option | Rackmount |
| Other | RJ45 Management port |
Cisco Meraki MS410-16 Cld-Mngd 16x Gi...
№ MS410-16-HW
| Switch, type | Fixed Port |
|---|---|
| Total number of ports | 48 |
| Мain ports, type | 48x 10/100/1000Base-T |
| Power Over Ethernet (PoE) | UPoE/802.3bt; PoE W/ Primary PS:822W, Power Load (idle/max): 145 / 844.9 W |
| Uplink ports | Modular; Two 40G or four/eight 10G modular fiber uplinks |
| Management | 1x Dedicated Management Interface; Managed via Cisco Meraki Dashboard |
| Stackable | 2x 120G Hardware Stack Ports; Physically stack up to 8 switches with 480 Gbps of stacking bandwidth on all models; Virtual stacking supports thousands of switch ports in a single logical stack for unified management, monitoring, and configuration |
| Fans | 3x Hot Swap Fans |
| Power supply | 1 x Power Supply (MA-PWR- 1100WAC); Dual Hot Swap Power Supply |
| Routing | Static routing, OSPFv2l Multicast routing (PIM-ASM); Warm Spare (VRRP) ; DHCP Server, DHCP Relay |
| Routing/Switching capacity, Gbps | 256 Gbps |
| Throughput, Mpps | 190.48 Mpps |
| MAC addresses | 32K |
| VLAN (number, standards) | 802.1Q VLAN and trunking support for up to 4094 VLANs (1000 active VLANs with STP enabled) |
| QoS | 802.1p Quality of Service, 8 queues (w/ 6 configurable for DSCP-to-CoS mapping) |
| L2 network standards | Single Instance of 802.1s Multiple Spanning Tree Protocol (interoperable with RSTP, STP, PVST, RPVST); 802.1ab Link Layer Discovery Protocol (LLDP) and Cisco Discovery Protocol (CDP); 802.3ad Link aggregation |
| L3 network standards | Static routing, OSPFv2; Multicast routing (PIM-ASM); Warm Spare (VRRP) ; DHCP Server, DHCP Relay |
| IPv6 functionality | IPv4 and IPv6 ACLs |
| Security | Port security: Sticky MAC, MAC allow lists; DHCP; IEEE 802.1X RADIUS and MAB, hybrid authentication and RADIUS server testing; Single-Host/Multi-Domain/Multi-Host/Multi Authentication; Integrated multi-factor authentication for Dashboard management; etc. |
| Dimensions (W, D, H), mm | 445 x 488 x 44 mm |
| Мounting option | 1U RackMount |
Cisco Meraki MS390 48GE L3 UPOE Switc...
№ MS390-48U-HW
| Switch, type | Fixed Port |
|---|---|
| Total number of ports | 24 |
| Мain ports, type | 24x 100M/1G/2.5G/5G/10G RJ45 |
| Power Over Ethernet (PoE) | UPoE/802.3bt switch; PoE W/ Primary PS:560W, Power Load (idle/max): 162.7 / 809.9 W |
| Uplink ports | Modular; Two 40G or four/eight 10G modular fiber uplinks |
| Management | 1x Dedicated Management Interface; Managed via Cisco Meraki Dashboard |
| Stackable | 2x 120G Hardware Stack Ports; Physically stack up to 8 switches with 480 Gbps of stacking bandwidth on all models; Virtual stacking supports thousands of switch ports in a single logical stack for unified management, monitoring, and configuration |
| Fans | 3x Hot Swap Fans |
| Power supply | 1 x Power Supply (MA-PWR-1100WAC); Dual Hot Swap Power Supply |
| Routing | Static routing, OSPFv2l Multicast routing (PIM-ASM); Warm Spare (VRRP) ; DHCP Server, DHCP Relay |
| Routing/Switching capacity, Gbps | 640 Gbps |
| Throughput, Mpps | 476.19 Mpps |
| MAC addresses | 32K |
| VLAN (number, standards) | 802.1Q VLAN and trunking support for up to 4094 VLANs (1000 active VLANs with STP enabled) |
| QoS | 802.1p Quality of Service, 8 queues (w/ 6 configurable for DSCP-to-CoS mapping) |
| L2 network standards | Single Instance of 802.1s Multiple Spanning Tree Protocol (interoperable with RSTP, STP, PVST, RPVST); 802.1ab Link Layer Discovery Protocol (LLDP) and Cisco Discovery Protocol (CDP); 802.3ad Link aggregation |
| L3 network standards | Static routing, OSPFv2; Multicast routing (PIM-ASM); Warm Spare (VRRP) ; DHCP Server, DHCP Relay |
| IPv6 functionality | IPv4 and IPv6 ACLs |
| Security | Port security: Sticky MAC, MAC allow lists; DHCP; IEEE 802.1X RADIUS and MAB, hybrid authentication and RADIUS server testing; Single-Host/Multi-Domain/Multi-Host/Multi Authentication; Integrated multi-factor authentication for Dashboard management; etc. |
| Dimensions (W, D, H), mm | 445 x 513 x 44 mm |
| Мounting option | 1U RackMount |
Cisco Meraki MS390 24mGig L3 UPOE Swi...
№ MS390-24UX-HW
| Switch, type | Fixed Port |
|---|---|
| Total number of ports | 48 |
| Мain ports, type | 36 x 100M/1G/2.5G + 12 x 100M/1G/2.5G/5G/10G |
| Power Over Ethernet (PoE) | UPoE/802.3bt; PoE W/ Primary PS:490W, Power Load (idle/max): 218.5 / 785.5 W |
| Uplink ports | Modular; Two 40G or four/eight 10G modular fiber uplinks |
| Management | 1x Dedicated Management Interface; Managed via Cisco Meraki Dashboard |
| Stackable | 2x 120G Hardware Stack Ports; Physically stack up to 8 switches with 480 Gbps of stacking bandwidth on all models; Virtual stacking supports thousands of switch ports in a single logical stack for unified management, monitoring, and configuration |
| Fans | 3x Hot Swap Fans |
| Power supply | 1 x Power Supply (MA-PWR- 1100WAC); Dual Hot Swap Power Supply |
| Routing | Static routing, OSPFv2l Multicast routing (PIM-ASM); Warm Spare (VRRP) ; DHCP Server, DHCP Relay |
| Routing/Switching capacity, Gbps | 580 Gbps |
| Throughput, Mpps | 431.54 Mpps |
| MAC addresses | 32K |
| VLAN (number, standards) | 802.1Q VLAN and trunking support for up to 4094 VLANs (1000 active VLANs with STP enabled) |
| QoS | 802.1p Quality of Service, 8 queues (w/ 6 configurable for DSCP-to-CoS mapping) |
| L2 network standards | Single Instance of 802.1s Multiple Spanning Tree Protocol (interoperable with RSTP, STP, PVST, RPVST); 802.1ab Link Layer Discovery Protocol (LLDP) and Cisco Discovery Protocol (CDP); 802.3ad Link aggregation |
| L3 network standards | Static routing, OSPFv2; Multicast routing (PIM-ASM); Warm Spare (VRRP) ; DHCP Server, DHCP Relay |
| IPv6 functionality | IPv4 and IPv6 ACLs |
| Security | Port security: Sticky MAC, MAC allow lists; DHCP; IEEE 802.1X RADIUS and MAB, hybrid authentication and RADIUS server testing; Single-Host/Multi-Domain/Multi-Host/Multi Authentication; Integrated multi-factor authentication for Dashboard management; etc. |
| Dimensions (W, D, H), mm | 445 x 564 x 44 mm |
| Мounting option | 1U RackMount |
Cisco Meraki MS390 48 port 12mGig, 36...
№ MS390-48UX-HW
| Switch, type | Fixed Port |
|---|---|
| Total number of ports | 26/28 |
| Мain ports, type | 16x10/100/1000Base-T + 8x10GBase-T |
| Power Over Ethernet (PoE) | Available PoE+ Power: 740 W |
| Uplink ports | 2x40GE SFP or 4x10GE SFP |
| Open (10GB) slots | No |
| Management | Managed via the Web with the Meraki cloud management platform; Integrated with Meraki Wireless and complete portfolio of IT products and solutions; SNMP and SYSLOG support for integration with other network management solutions |
| Stackable | 2 x 100G QSFP28 stacking ports; Physically stack up to 8 switches with 400 Gbps of stacking bandwidth; Virtual Stacking supports thousands of switch ports in a single logical stack for unified management, monitoring, and configuration |
| Fans | Variable speed fans |
| Power supply | Hot-swappable Power Supply Configuration; Supported Power Supply: MA-PWR-1025WAC |
| Routing | Layer 3 Advanced |
| Routing/Switching capacity, Gbps | 352 Gbps |
| Throughput, Mpps | 262 Mpps |
| MAC addresses | 32000 MAC address table size |
| VLAN (number, standards) | 802.1Q VLAN and trunking support for up to 4094 VLANs |
| QoS | 802.1p Quality of Service, 8 queues (w/ 6 configurable for DSCP-to-CoS mapping) |
| L2 network standards | IEEE 802.3, IEEE 802.3u, IEEE 802.3af, IEEE 802.3at, IEEE 802.1D, IEEE 802.1Q, IEEE 802.1p, IEEE 802.3ad, IEEE 802.1w, IEEE 802.1x, IEEE 802.1ab |
| L3 network standards | Static routing, OSFPv2 (with support for up to 16 ECMP Routes), Multicast routing, Warm Spare (VRRP) - OSPF and Warm Spare do not operate concurrently, DHCP Server, DHCP Relay |
| Security | Integrated multi-factor authentication for Dashboard management; Role-based access control (RBAC) with granular device and configuration control; IEEE 802.1X RADIUS and MAB, hybrid authentication and RADIUS server testing; IPv4 and IPv6 ACLs |
| Dimensions (W, D, H), mm | 485 x 517 x 44 |
| Мounting option | Rackmount |
Cisco Meraki MS355-L3 Stck Cld-Mngd 2...
№ MS355-24X-HW
| Switch, type | Fixed Port |
|---|---|
| Total number of ports | 48 |
| Мain ports, type | 48 x 100M/1G/2.5G/5G |
| Power Over Ethernet (PoE) | UPoE/802.3bt; PoE W/ Primary PS:645W, Power Load (idle/max): 157.9 / 843.8 W |
| Uplink ports | Modular; Two 40G or four/eight 10G modular fiber uplinks |
| Management | 1x Dedicated Management Interface; Managed via Cisco Meraki Dashboard |
| Stackable | 2x 120G Hardware Stack Ports; Physically stack up to 8 switches with 480 Gbps of stacking bandwidth on all models; Virtual stacking supports thousands of switch ports in a single logical stack for unified management, monitoring, and configuration |
| Fans | 3x Hot Swap Fans |
| Power supply | 1 x Power Supply (MA-PWR- 1100WAC); Dual Hot Swap Power Supply |
| Routing | Static routing, OSPFv2l Multicast routing (PIM-ASM); Warm Spare (VRRP) ; DHCP Server, DHCP Relay |
| Routing/Switching capacity, Gbps | 640 Gbps |
| Throughput, Mpps | 476.19 Mpps |
| MAC addresses | 32K |
| VLAN (number, standards) | 802.1Q VLAN and trunking support for up to 4094 VLANs (1000 active VLANs with STP enabled) |
| QoS | 802.1p Quality of Service, 8 queues (w/ 6 configurable for DSCP-to-CoS mapping) |
| L2 network standards | Single Instance of 802.1s Multiple Spanning Tree Protocol (interoperable with RSTP, STP, PVST, RPVST); 802.1ab Link Layer Discovery Protocol (LLDP) and Cisco Discovery Protocol (CDP); 802.3ad Link aggregation |
| L3 network standards | Static routing, OSPFv2; Multicast routing (PIM-ASM); Warm Spare (VRRP) ; DHCP Server, DHCP Relay |
| IPv6 functionality | IPv4 and IPv6 ACLs |
| Security | Port security: Sticky MAC, MAC allow lists; DHCP; IEEE 802.1X RADIUS and MAB, hybrid authentication and RADIUS server testing; Single-Host/Multi-Domain/Multi-Host/Multi Authentication; Integrated multi-factor authentication for Dashboard management; etc. |
| Dimensions (W, D, H), mm | 445 x 564 x 44 mm |
| Мounting option | 1U RackMount |
Cisco Meraki MS390 48m5G L3 UPOE Swit...
№ MS390-48UX2-HW
| Switch, type | Fixed Port |
|---|---|
| Total number of ports | 26/28 |
| Мain ports, type | 24x10GBase-T |
| Power Over Ethernet (PoE) | Available PoE+ Power: 740 W |
| Uplink ports | 2x40GE SFP or 4x10GE SFP |
| Open (10GB) slots | No |
| Management | Managed via the Web with the Meraki cloud management platform; Integrated with Meraki Wireless and complete portfolio of IT products and solutions; SNMP and SYSLOG support for integration with other network management solutions |
| Stackable | 2 x 100G QSFP28 stacking ports; Physically stack up to 8 switches with 400 Gbps of stacking bandwidth; Virtual Stacking supports thousands of switch ports in a single logical stack for unified management, monitoring, and configuration |
| Fans | Variable speed fans |
| Power supply | Hot-swappable Power Supply Configuration; Supported Power Supply: MA-PWR-1025WAC |
| Routing | Layer 3 Advanced |
| Routing/Switching capacity, Gbps | 640 Gbps |
| Throughput, Mpps | 476 Mpps |
| MAC addresses | 32000 MAC address table size |
| VLAN (number, standards) | 802.1Q VLAN and trunking support for up to 4094 VLANs |
| QoS | 802.1p Quality of Service, 8 queues (w/ 6 configurable for DSCP-to-CoS mapping) |
| L2 network standards | IEEE 802.3, IEEE 802.3u, IEEE 802.3af, IEEE 802.3at, IEEE 802.1D, IEEE 802.1Q, IEEE 802.1p, IEEE 802.3ad, IEEE 802.1w, IEEE 802.1x, IEEE 802.1ab |
| L3 network standards | Static routing, OSFPv2 (with support for up to 16 ECMP Routes), Multicast routing, Warm Spare (VRRP) - OSPF and Warm Spare do not operate concurrently, DHCP Server, DHCP Relay |
| Security | Integrated multi-factor authentication for Dashboard management; Role-based access control (RBAC) with granular device and configuration control; IEEE 802.1X RADIUS and MAB, hybrid authentication and RADIUS server testing; IPv4 and IPv6 ACLs |
| Dimensions (W, D, H), mm | 485 x 517 x 44 |
| Мounting option | Rackmount |
Cisco Meraki MS355-L3 Stck Cld-Mngd 2...
№ MS355-24X2-HW
| Switch, type | Fixed Port |
|---|---|
| Total number of ports | 50/52 |
| Мain ports, type | 24x10/100/1000Base-T + 24x10GBase-T |
| Power Over Ethernet (PoE) | Available PoE+ Power: 740 W |
| Uplink ports | 2x40GE SFP or 4x10GE SFP |
| Open (10GB) slots | No |
| Management | Managed via the Web with the Meraki cloud management platform; Integrated with Meraki Wireless and complete portfolio of IT products and solutions; SNMP and SYSLOG support for integration with other network management solutions |
| Stackable | 2 x 100G QSFP28 stacking ports; Physically stack up to 8 switches with 400 Gbps of stacking bandwidth; Virtual Stacking supports thousands of switch ports in a single logical stack for unified management, monitoring, and configuration |
| Fans | Variable speed fans |
| Power supply | Hot-swappable Power Supply Configuration; Supported Power Supply: MA-PWR-1025WAC |
| Routing | Layer 3 Advanced |
| Routing/Switching capacity, Gbps | 688 Gbps |
| Throughput, Mpps | 512 Mpps |
| MAC addresses | 32000 MAC address table size |
| VLAN (number, standards) | 802.1Q VLAN and trunking support for up to 4094 VLANs |
| QoS | 802.1p Quality of Service, 8 queues (w/ 6 configurable for DSCP-to-CoS mapping) |
| L2 network standards | IEEE 802.3, IEEE 802.3u, IEEE 802.3af, IEEE 802.3at, IEEE 802.1D, IEEE 802.1Q, IEEE 802.1p, IEEE 802.3ad, IEEE 802.1w, IEEE 802.1x, IEEE 802.1ab |
| L3 network standards | Static routing, OSFPv2 (with support for up to 16 ECMP Routes), Multicast routing, Warm Spare (VRRP) - OSPF and Warm Spare do not operate concurrently, DHCP Server, DHCP Relay |
| Security | Integrated multi-factor authentication for Dashboard management; Role-based access control (RBAC) with granular device and configuration control; IEEE 802.1X RADIUS and MAB, hybrid authentication and RADIUS server testing; IPv4 and IPv6 ACLs |
| Dimensions (W, D, H), mm | 485 x 517 x 44 |
| Мounting option | Rackmount |
Cisco Meraki MS355-L3 Stck Cld-Mngd 4...
№ MS355-48X2-HW
| Switch, type | Fixed Port |
|---|---|
| Total number of ports | 18 |
| Мain ports, type | 16x10GE SFP |
| Power Over Ethernet (PoE) | No |
| Uplink ports | 2x40GE SFP |
| Open (10GB) slots | No |
| Management | Managed via the Web with the Meraki cloud management platform; Integrated with Meraki Wireless and complete portfolio of IT products and solutions; SNMP and SYSLOG support for integration with other network management solutions |
| Stackable | 2 x 40G QSFP+ stacking ports; Physically stack up to 8 switches with 160 Gbps of stacking bandwidth; Virtual Stacking; Flexible stacking on all interfaces and SFP+/QSFP+ accessory types, up to 8 switches |
| Fans | Field-replaceable, hot-swappable fans |
| Power supply | Hot-swappable Power Supply Configuration; Supported Power Supply: 2 x 250W PSU (Single power supply (PSU) included. For redundancy, second PSU is sold separately) |
| Routing | Layer 3 Advanced |
| Routing/Switching capacity, Gbps | 480 Gbps |
| MAC addresses | 228000 MAC address table size |
| VLAN (number, standards) | 802.1Q VLAN and trunking support for up to 4094 VLANs |
| QoS | 802.1p Quality of Service, 8 queues (w/ 6 configurable for DSCP-to-CoS mapping) |
| L2 network standards | IEEE 802.3, IEEE 802.3u, IEEE 802.1D, IEEE 802.1Q, IEEE 802.1p, IEEE 802.3ad, IEEE 802.1w, IEEE 802.1x, IEEE 802.1ab |
| L3 network standards | Static routing, OSFPv2, Multicast routing, Warm Spare (VRRP) - OSPF and Warm Spare do not operate concurrently, DHCP Server, DHCP Relay |
| Security | IEEE 802.1X, MAB, and Hybrid authentication support for wired access control with RADIUS server monitoring; ACL support (IPv4 & IPv6) and MAC whitelisting; Single-Host/Multi-Domain/Multi-Host/Multi Authentication |
| Dimensions (W, D, H), mm | 484 x 487 x 44 |
| Мounting option | Rackmount |
| Other | RJ45 Management port |
Cisco Meraki MS425-16 L3 Cld-Mngd 16x...
№ MS425-16-HW
| Switch, type | Fixed Port |
|---|---|
| Total number of ports | 36 |
| Мain ports, type | 32xSFP |
| Power Over Ethernet (PoE) | No |
| Uplink ports | 4x10GE SFP |
| Open (10GB) slots | No |
| Management | Managed via the Web with the Meraki cloud management platform; Integrated with Meraki Wireless and complete portfolio of IT products and solutions; SNMP and SYSLOG support for integration with other network management solutions |
| Stackable | 2 x stacking ports; Physically stack up to 8 switches with 160 Gbps of stacking bandwidth; Virtual Stacking supports thousands of switch ports in a single logical stack for unified management, monitoring, and configuration |
| Fans | Field-replaceable, hot-swappable fans |
| Power supply | Hot-swappable Power Supply Configuration; Supported Power Supply: 2 x 250W PSU (Single power supply (PSU) included. For redundancy, second PSU is sold separately) |
| Routing | Layer 3 Advanced |
| Routing/Switching capacity, Gbps | 144 Gbps |
| MAC addresses | 96000 MAC address table size |
| VLAN (number, standards) | 802.1Q VLAN and trunking support for up to 4094 VLANs |
| QoS | 802.1p Quality of Service, 8 queues (w/ 6 configurable for DSCP-to-CoS mapping) |
| L2 network standards | IEEE 802.3, IEEE 802.3u, IEEE 802.1D, IEEE 802.1Q, IEEE 802.1p, IEEE 802.3ad, IEEE 802.1w, IEEE 802.1x, IEEE 802.1ab |
| L3 network standards | Static routing, OSFPv2, Multicast routing, Warm Spare (VRRP) - OSPF and Warm Spare do not operate concurrently, DHCP Server, DHCP Relay |
| Security | IEEE 802.1X, MAB, and Hybrid authentication support for wired access control with RADIUS server monitoring; ACL support (IPv4 & IPv6) and MAC whitelisting; Single-Host/Multi-Domain/Multi-Host/Multi Authentication |
| Dimensions (W, D, H), mm | 485 x 517 x 44 |
| Мounting option | Rackmount |
| Other | RJ45 Management port |
Cisco Meraki MS410-32 Cld-Mngd 32x Gi...
№ MS410-32-HW
| Switch, type | Fixed Port |
|---|---|
| Total number of ports | 50/52 |
| Мain ports, type | 32x10/100/1000Base-T + 16x10GBase-T |
| Power Over Ethernet (PoE) | Available PoE+ Power: 740 W |
| Uplink ports | 2x40GE SFP or 4x10GE SFP |
| Open (10GB) slots | No |
| Management | Managed via the Web with the Meraki cloud management platform; Integrated with Meraki Wireless and complete portfolio of IT products and solutions; SNMP and SYSLOG support for integration with other network management solutions |
| Stackable | 2 x 100G QSFP28 stacking ports; Physically stack up to 8 switches with 400 Gbps of stacking bandwidth; Virtual Stacking supports thousands of switch ports in a single logical stack for unified management, monitoring, and configuration |
| Fans | Variable speed fans |
| Power supply | Hot-swappable Power Supply Configuration; Supported Power Supply: MA-PWR-1025WAC |
| Routing | Layer 3 Advanced |
| Routing/Switching capacity, Gbps | 544 Gbps |
| Throughput, Mpps | 405 Mpps |
| MAC addresses | 32000 MAC address table size |
| VLAN (number, standards) | 802.1Q VLAN and trunking support for up to 4094 VLANs |
| QoS | 802.1p Quality of Service, 8 queues (w/ 6 configurable for DSCP-to-CoS mapping) |
| L2 network standards | IEEE 802.3, IEEE 802.3u, IEEE 802.3af, IEEE 802.3at, IEEE 802.1D, IEEE 802.1Q, IEEE 802.1p, IEEE 802.3ad, IEEE 802.1w, IEEE 802.1x, IEEE 802.1ab |
| L3 network standards | Static routing, OSFPv2 (with support for up to 16 ECMP Routes), Multicast routing, Warm Spare (VRRP) - OSPF and Warm Spare do not operate concurrently, DHCP Server, DHCP Relay |
| Security | Integrated multi-factor authentication for Dashboard management; Role-based access control (RBAC) with granular device and configuration control; IEEE 802.1X RADIUS and MAB, hybrid authentication and RADIUS server testing; IPv4 and IPv6 ACLs |
| Dimensions (W, D, H), mm | 485 x 517 x 44 |
| Мounting option | Rackmount |
Cisco Meraki MS355-L3 Stck Cld-Mngd 4...
№ MS355-48X-HW
| Switch, type | Fixed Port |
|---|---|
| Total number of ports | 34 |
| Мain ports, type | 32x10GE SFP |
| Power Over Ethernet (PoE) | No |
| Uplink ports | 2x40GE SFP |
| Open (10GB) slots | No |
| Management | Managed via the Web with the Meraki cloud management platform; Integrated with Meraki Wireless and complete portfolio of IT products and solutions; SNMP and SYSLOG support for integration with other network management solutions |
| Stackable | 2 x 40G QSFP+ stacking ports; Physically stack up to 8 switches with 160 Gbps of stacking bandwidth; Virtual Stacking; Flexible stacking on all interfaces and SFP+/QSFP+ accessory types, up to 8 switches |
| Fans | Field-replaceable, hot-swappable fans |
| Power supply | Hot-swappable Power Supply Configuration; Supported Power Supply: 2 x 250W PSU (Single power supply (PSU) included. For redundancy, second PSU is sold separately) |
| Routing | Layer 3 Advanced |
| Routing/Switching capacity, Gbps | 800 Gbps |
| MAC addresses | 228000 MAC address table size |
| VLAN (number, standards) | 802.1Q VLAN and trunking support for up to 4094 VLANs |
| QoS | 802.1p Quality of Service, 8 queues (w/ 6 configurable for DSCP-to-CoS mapping) |
| L2 network standards | IEEE 802.3, IEEE 802.3u, IEEE 802.1D, IEEE 802.1Q, IEEE 802.1p, IEEE 802.3ad, IEEE 802.1w, IEEE 802.1x, IEEE 802.1ab |
| L3 network standards | Static routing, OSFPv2, Multicast routing, Warm Spare (VRRP) - OSPF and Warm Spare do not operate concurrently, DHCP Server, DHCP Relay |
| Security | IEEE 802.1X, MAB, and Hybrid authentication support for wired access control with RADIUS server monitoring; ACL support (IPv4 & IPv6) and MAC whitelisting; Single-Host/Multi-Domain/Multi-Host/Multi Authentication |
| Dimensions (W, D, H), mm | 484 x 487 x 44 |
| Мounting option | Rackmount |
| Other | RJ45 Management port |
Cisco Meraki MS425-32 L3 Cld-Mngd 32x...
№ MS425-32-HW
